SS52 MS7 Codec Series
SS52 MS7 Codec Series
Only available for the models ON-MIX-52B, ON-MIX-52BW, ON-MIX-52BP, ON-MIX-52D, ON-MIX-52DW.
NOTE:
- Typically the one listed first in the following table is the latest firmware version.
- Once you download the firmware file, you may need to decompress or extract it from its compressed format (e.g., a .zip or .rar file) before you can proceed with the firmware update process. And there're specific firmware files that are designed for different applications: one for CCTV surveillance and another for live broadcasting. It's important to select the appropriate firmware version based on the intended use case, either for CCTV surveillance or live broadcasting, to ensure compatibility and proper functionality for your specific application.
- When updating firmware, especially if you are running a very old version, it may be necessary to upgrade the firmware step by step rather than jumping directly to the latest version. This incremental approach helps to ensure a smooth and successful firmware update process. By upgrading in smaller increments, you reduce the likelihood of compatibility issues or potential conflicts between the very old version and the latest version. This also allows the firmware update to address any specific changes or fixes made in each version, ensuring that your system is fully updated and functioning properly at every stage.
- It's strongly recommended to do upgrading via device manager and it's under wired connection. When upgrading an encoder, it is usually recommended to follow best practices to ensure a smooth and reliable upgrade process. Please refer to article Upgrade Firmware.
- The version number "HDMI_V3.00.52.220921" can be interpreted as indicating that the firmware version was released on September 21st, 2022.
- "V3.00.52" indicates the major, minor, and patch version numbers of the firmware.
- "220921" represents the release date, with "22" for the year 2022, "09" for the month of September, and "21" for the 21st day of the month.
|
Firmware Version
|
Remark
|
|
Built-in RTMP Server(Typing Error in FM Version)
|
|
|
Kernel Optimized
|
|
|
Kernel Optimized
|
|
|
HDMI Output 1920*1200@60HZ Supported
|
|
|
HDMI Output 1920*1200@60HZ Supported
|
Related Articles
System Setting of Codec
SS50 | SS52 MS7 Codec Series System Settings Go to Setting->System Setting->Change "Device Name" or Upload "Boot Logo" or "Video Lost Picture" if required Configure HDMI output resolution by scrolling down to desired resolution from Video Output ...FAQs: Channel of Codec
SS50 MS7 Codec Series What is the decoding capacity of this codec in terms of channels? This codec can decode a maximum of four channels, which can be configured as 2x USB camera and 2x network streams, or 1x USB camera and 3x network streams, or ...FAQs: WiFi of Codec
Why is it failed to connect to WiFi? To troubleshoot the issue, you can try following steps: Ensure that the SSID (WiFi network name) consists of a combination of alphabets in English and numbers only. Double-check if the password entered for the ...Channel of Codec
SS50 MS7 Codec Series Channel Go to Setting->System->Channel->Encode Channel or Decode Channel Add CH5->Click"Modify"->Select Protocol (SQ, RTSP, RTMP, TS[TS, HLS]) Enter Device Name->Device Address->Username->Password Click"Confirm" and then CH5 is ...Preview of Codec
Preview Start a browser like IE, Chrome, Firefox (Chrome Recommended); Enter the IP address you configured above via IPCManager; Enter username (admin) and password (12345 by default); Click “Login” and the Preview page opens in your browser ?TIPS: ...