Image of Codec
Basic Setting
|
Items
|
Options |
|
Channel
|
CH1~CH4
|
|
Saturation
|
0-100
|
|
Brightness
|
0-100
|
|
Sharpness
|
0-100
|
|
Contrast
|
0-100
|
🧙TIPS: It is limited to change the image settings of CH1(HDMI).
Related Articles
Quick Start of Codec
Connection Diagram Power on encoder and connect it to router via ethernet cable NOTE: At the very beginning, it's strongly recommended to follow this instructions to connect the encoder, especially for network segment issues. If it's failed to be ...FAQs: System Settings of Codec
How can I replace the image of video loss? To replace the image of video loss and customize the display in the system setting, follow these steps: Navigate to Setting: Access the system settings by locating the "Settings" option in the menu of the ...System Setting of Codec
System Setting Go to Setting->System Setting->Upload "Boot Logo" or "Video Lost Picture" if required ?TIPS: 1. Currently it's unavailble for TV30 & SS50 Codec Series to switch system mode. If 50/60fps are required, please select encoder series. 2. ...Introduction of Codec
EXVIST Encoder & Decoder What's HDMI encoder? An HDMI encoder is a device that takes an HDMI input signal and converts it into a digital format that is suitable for transmission over a network. This process usually involves compressing the video and ...Audio of Codec
Audio Go to Setting->Video/Audio->Audio Item Description Channel CH1~CH4 Audio input HDMI or Line-in(3.5mm only) Or Audio Mix Samples 48000 Codec type G.711A/G.711U/AAC; AAC should be enabled by default if it's needed to push live video to YouTube, ...