Record | HDMI Codec

Record of Codec

Record Video

  1. Go to Record-->Select Channel-->Select Main or Sub Stream-->Pack Time 
  2. Click “Start Recording” and it’s turn to “Stop Recording” 
  3. Check “Record Status” whether it’s shown “Recording”
Info
🧙TIPS: As well it'll be easier to press RES/REC button for 1 second to start recording or stop recording.

    • Related Articles

    • Quick Start of Codec

      Connection Diagram Power on encoder and connect it to router via ethernet cable NOTE: At the very beginning, it's strongly recommended to follow this instructions to connect the encoder, especially for network segment issues. If it's failed to be ...

    • View Record of Codec

      View Record Go to Setting-->Storage-->View Record Select Date & Time-->Search-->All recordings will be listed Click “Play” -->Video will be played after loading ?TIPS: it's recommended to click videos with durations for 10/20/30 minutes to play, or ...

    • FAQs: Channel of Codec

      SS50 MS7 Codec Series What is the decoding capacity of this codec in terms of channels? This codec can decode a maximum of four channels, which can be configured as 2x USB camera and 2x network streams, or 1x USB camera and 3x network streams, or ...

    • Channel of Codec

      SS50 MS7 Codec Series Channel Go to Setting->System->Channel->Encode Channel or Decode Channel Add CH5->Click"Modify"->Select Protocol (SQ, RTSP, RTMP, TS[TS, HLS]) Enter Device Name->Device Address->Username->Password Click"Confirm" and then CH5 is ...

    • Date & Time of Codec

      Time Zone Go to Setting->System->Date & Time Item Description Date Current exact date Time Current time Time Zone Select the correct time zone Sync mode Manually/NTP(By default) NTP server pool.ntp.org(By default) NTP port 123(By default) NTP ...