Multicast of Codec
Multicast
- Go to Setting->Network->Multicast
|
Item
|
Description |
|
Main Stream
|
Enable: Check the checkbox;
Multicast address: 224.1.2.3;
Port: change port if required;
|
|
Sub Stream
|
Enable: Check the checkbox;
Multicast address: 224.1.2.3;
Port: Change port if required;
|
Video Tutorial
Simply transmit video stream via UDP
Related Articles
Overview of Codec
Overview Click Setting and it'll show you the Overview of current status of encoder as below: NOTES: You can also read more about Channel of Codec. Learn more about FAQs of Overview FAQs: Overview of CodecSystem Setting of Codec
SS50 | SS52 MS7 Codec Series System Settings Go to Setting->System Setting->Change "Device Name" or Upload "Boot Logo" or "Video Lost Picture" if required Configure HDMI output resolution by scrolling down to desired resolution from Video Output ...FAQs: Channel of Codec
SS50 MS7 Codec Series What is the decoding capacity of this codec in terms of channels? This codec can decode a maximum of four channels, which can be configured as 2x USB camera and 2x network streams, or 1x USB camera and 3x network streams, or ...FAQs: Image of Codec
Why is there no preview in the Image Settings Page on my HDMI Codec? If you can't see a preview in the image settings page on your HDMI codec, it's likely due to using an outdated firmware version. Here’s how to address the issue: 1. Firmware ...FAQs: WiFi of Codec
Why is it failed to connect to WiFi? To troubleshoot the issue, you can try following steps: Ensure that the SSID (WiFi network name) consists of a combination of alphabets in English and numbers only. Double-check if the password entered for the ...