DDNS Settings for HDMI Codecs | Exvist Support

DDNS of Codec

DDNS

  1. Go to Setting->Network->DDNS
Item
Description
Enable
Check the checkbox to Enable/Disable
Server
3322 or Oray to select
Domain
Enter domain
Username
Enter username of the above domain
Password
Enter password of the above domain
Update Interval
1H, 2H, 4H, 6H, 12H to select


    • Related Articles

    • Quick Start of Codec

      Connection Diagram Power on encoder and connect it to router via ethernet cable NOTE: At the very beginning, it's strongly recommended to follow this instructions to connect the encoder, especially for network segment issues. If it's failed to be ...
    • FAQs: RTMP of Codec

      RTMP Protocol What's RTMP? RTMP stands for Real-Time Messaging Protocol. It is a streaming protocol developed by Adobe Systems for transmitting audio, video, and data over the internet in real-time. RTMP is commonly used for live streaming and ...
    • Overview of Codec

      Overview Click Setting and it'll show you the Overview of current status of encoder as below: NOTES: You can also read more about Channel of Codec. Learn more about FAQs of Overview FAQs: Overview of Codec
    • System Setting of Codec

      SS50 | SS52 MS7 Codec Series System Settings Go to Setting->System Setting->Change "Device Name" or Upload "Boot Logo" or "Video Lost Picture" if required Configure HDMI output resolution by scrolling down to desired resolution from Video Output ...
    • FAQs: Channel of Codec

      SS50 MS7 Codec Series What is the decoding capacity of this codec in terms of channels? This codec can decode a maximum of four channels, which can be configured as 2x USB camera and 2x network streams, or 1x USB camera and 3x network streams, or ...