Introduction of Codec
EXVIST Encoder & Decoder
What's HDMI encoder?
An HDMI encoder is a device that takes an HDMI input signal and converts it into a digital format that is suitable for transmission over a network. This process usually involves compressing the video and audio signals to reduce their size, making them more efficient for streaming or storage. HDMI encoders are commonly used in applications such as live streaming, video conferencing, remote monitoring, and digital signage, where the real-time encoding of high-definition video content is required. They enable the seamless transmission of HDMI signals over IP networks, allowing for easy distribution and display of content across various devices.
What's HDMI decoder?
An HDMI decoder is a device that receives a compressed digital signal from a network and then decodes it back into an HDMI output signal for display on a monitor, TV, or other compatible display device. This is commonly used in scenarios where video content has been encoded into a digital format for network transmission and needs to be decoded and displayed at the receiving end. HDMI decoders are used in video streaming, digital signage, video conferencing, and other applications where efficient transmission and display of high-quality video content is required.
What's EXVIST Encoder & Decoder?
EXVIST Encoder & Decoder (Codec) is a versatile video processing device that offers outstanding support for a wide range of input sources and streaming protocols. It is designed to encode HDMI input signals and decode network video streams from IP cameras, as well as EXVIST's encoder via RTSP, SQ, TS, RTMP protocols. Additionally, the SS50 Codec series also supports webcam input. With its comprehensive capabilities and compatibility, the EXVIST Encoder & Decoder is an ideal solution for video surveillance, streaming, and multimedia applications, offering users flexibility and reliable performance.
EXVIST's Encoder & Decoder are including TV30 CODEC SERIES(1080P), and SS50 CODEC SERIES (1080P) etc.
NOTE: This document might be changed and updated at any time without notice. If you have any questions, please contact us directly
TV30 CODEC SERIES
|
Part Number
|
|||||
|
Part Name
|
1080P Basic HDMI Encoder|Decoder w/HDMI Loopout, USB2.0 for Recording
|
1080P WiFi HDMI Encoder|Decoder w/HDMI Loopout, USB2.0 for Recording
|
1080P PoE HDMI Encoder|Decoder w/HDMI Loopout, USB2.0 for Recording
|
1080P Basic HDMI Encoder|Decoder w/Screen, HDMI Loopout, USB2.0 for Recording
|
1080P WiFi HDMI Encoder|Decoder w/Screen, HDMI Loopout, USB2.0 for Recording
|
|
Encoding|Decoding
|
Max. 2ch encoding & decoding, including 1ch HDMI input, up to 3ch decoding input
|
||||
|
HDMI Input
|
Max. 1920*1080P@60FPS, Encoding Up to 30FPS ONLY
|
||||
|
Frame Rate
|
Up to 25/30, Configurable
|
||||
|
Decoding Input
|
Max. 1ch 4K or 3ch 1080p SQ/RTSP/RTMP/TS network stream decoding input from IP camera, encoder, NVR etc. If it's required to decode 1ch 4K or 3ch 1080p, HDMI input should be disabled to make it valid.
|
||||
|
USB Input
|
Not Supported, Built-in USB2.0 for Local Recording ONLY
|
||||
|
Image Fusion
|
Supported, 1ch/2ch/3ch image fusion preview and output
|
||||
|
Video Output
|
1ch/2ch/3ch image fusion output by HDMI loopout or network stream
|
||||
|
HDMI Output
|
Max. 1920*1080P@30fps
|
||||
|
Audio Input
|
Embedded over HDMI or 3.5mm Line-In
|
||||
|
Audio output
|
Embedded over HDMI or 3.5mm Line-Out
|
||||
|
Audio Mix
|
Supported, Available for Latest Firmware ONLY, Combining Audio from HDMI and Line-In to Output, But Decrease Volume for Active Audio
|
||||
|
Local Recording
|
Built-in USB2.0 for Local Recording, Max. 128GB
|
||||
|
Interfaces
|
1x HDMI In, 1x HDMI Out, 1x 3.5mm Line-In, 1x 3.5mm Line-Out, 1x USB2.0, 1x Hardware Reset Button, 1x RJ45
|
||||
|
Screen
|
Not Supported
|
Built-in OLED, Displaying IP Address, Video/Audio Source
|
|||
SS50 CODEC SERIES
|
Part Number
|
|||||
|
Part Name
|
1080P Basic HDMI Encoder|Decoder w/HDMI Loopout, Dual USB2.0 for Webcam/Recoding/Playing
|
1080P WiFi HDMI Encoder|Decoder w/HDMI Loopout, Dual USB2.0 for Webcam/Recoding/Playing
|
1080P PoE HDMI Encoder|Decoder w/HDMI Loopout, Dual USB2.0 for Webcam/Recoding/Playing
|
1080P Basic HDMI Encoder|Decoder w/Screen, HDMI Loopout, Dual USB2.0 for Webcam/Recoding/Playing
|
1080P WiFi HDMI Encoder|Decoder w/Screen, HDMI Loopout, Dual USB2.0 for Webcam/Recoding/Playing
|
|
Encoding|Decoding
|
Max. 4ch encoding & decoding, including 1ch HDMI input, up to 4ch decoding input, up to 2ch USB input
|
||||
|
HDMI Input
|
Max. 1920*1080P@60FPS, Encoding Up to 30FPS ONLY
|
||||
|
Decoding Input
|
Max. 1ch 4K or 4ch 1080p SQ/RTSP/RTMP/TS network stream decoding input from IP camera, encoder, NVR etc.
|
||||
|
USB Input
|
Max. 2ch USB2.0 webcam input, compatible with Hikvision, Logitech's webcam
|
||||
|
Image Fusion
|
Supported, 1ch/2ch/3ch/4ch image fusion preview and output
|
||||
|
Video Output
|
1ch/2ch/3ch/4ch image fusion output by HDMI loopout or network stream
|
||||
|
HDMI Output
|
Max. 1920*1080P@60fps
|
||||
|
Audio I/O
|
Embedded over HDMI or 3.5mm Line-In/Out
|
||||
|
Audio Mix
|
Supported, Available for Latest Firmware ONLY, Combining Audio from HDMI and Line-In to Output, But Decrease Volume for Active Audio
|
||||
|
USB Port
|
2ch USB2.0, available for 1080p Webcam/recording/playing
|
||||
|
Local Recording
|
Built-In USB2.0 for Either Webcam or Local Recording, Max. 128GB
|
||||
|
Interfaces
|
1x HDMI In, 1x HDMI Out, 1x 3.5mm Line-In/Out, 2x USB2.0, 1x Hardware Reset Button, 1x RJ45
|
||||
|
Screen
|
Not Supported
|
Built-in OLED, Displaying IP Address, Video/Audio Source
|
|||
Video Tutorial of SS50 Codec Series
SS52 CODEC SERIES
|
Part Number
|
|||||
|
Part Name
|
1080P Basic HDMI Encoder/Decoder w/HDMI Loopout, Dual USB2.0 for Webcam/Recoding/Playing
|
1080P WiFi HDMI Encoder/Decoder w/HDMI Loopout, Dual USB2.0 for Webcam/Recoding/Playing
|
1080P PoE HDMI Encoder w/HDMI Loopout, Dual USB2.0 for Recoding/Playing
|
1080P Basic HDMI Encoder w/Screen, HDMI Loopout, Dual USB2.0 for Recoding/Playing
|
1080P WiFi HDMI Encoder w/Screen, HDMI Loopout, Dual USB2.0 for Recoding/Playing
|
|
Encoding|Decoding
|
Max. 2ch encoding & decoding, including 1ch HDMI input, up to 2ch decoding input, up to 2ch USB input
|
||||
|
HDMI Input
|
Max. 1920*1080P@60FPS, Encoding Up to 30FPS ONLY
|
||||
|
Decoding Input
|
Max. 2ch 1080p SQ/RTSP/RTMP/TS network stream decoding input from IP camera, encoder, NVR etc.
|
||||
|
USB Input
|
Max. 2ch USB2.0 webcam input, compatible with Hikvision, Logitech's webcam
|
||||
|
Image Fusion
|
Supported, 1ch/2ch/3ch/4ch image fusion preview and output
|
||||
|
Video Output
|
1ch/2ch/3ch/4ch image fusion output by HDMI loopout or network stream
|
||||
|
HDMI Output
|
Max. 3840*2160P@30fps, 1920*1080P@60FPS, Configurable From System Settings
|
||||
|
Audio I/O
|
Embedded over HDMI or 3.5mm Line-In/Out
|
||||
|
Audio Mix
|
Supported, Available for Latest Firmware ONLY, Combining Audio from HDMI and Line-In to Output, But Decrease Volume for Active Audio
|
||||
|
USB Port
|
2ch USB2.0, available for 1080p Webcam/recording/playing
|
||||
|
Local Recording
|
Built-in USB2.0 for Local Recording ONLY, Max. 128GB
|
||||
|
Interfaces
|
1x HDMI In, 1x HDMI Out, 1x 3.5mm Line-In/Out, 2x USB2.0, 1x Hardware Reset Button, 1x RJ45
|
||||
|
Screen
|
Not Supported
|
Built-in OLED, Displaying IP Address, Video/Audio Source
|
|||
Related Articles
FAQs: System Settings of Codec
Device Name How can I change the device name for my HDMI codec? To change the device name of your HDMI codec, follow these steps: Access Settings: Go to the Settings menu on your HDMI codec. Navigate to System: Select System, then choose System ...Overview of Codec
Overview Click Setting and it'll show you the Overview of current status of encoder as below: NOTES: You can also read more about Channel of Codec. Learn more about FAQs of Overview FAQs: Overview of CodecSystem Setting of Codec
SS50 | SS52 MS7 Codec Series System Settings Go to Setting->System Setting->Change "Device Name" or Upload "Boot Logo" or "Video Lost Picture" if required Configure HDMI output resolution by scrolling down to desired resolution from Video Output ...FAQs: Channel of Codec
SS50 MS7 Codec Series What is the decoding capacity of this codec in terms of channels? This codec can decode a maximum of four channels, which can be configured as 2x USB camera and 2x network streams, or 1x USB camera and 3x network streams, or ...FAQs: Image of Codec
Why is there no preview in the Image Settings Page on my HDMI Codec? If you can't see a preview in the image settings page on your HDMI codec, it's likely due to using an outdated firmware version. Here’s how to address the issue: 1. Firmware ...