System
FAQs: Overview of Codec
What does 1920*1080P@30HZ mean? If it shows 1920*1080P@30HZ on GUI, probably it's failed to detect the HDMI signal. Take the following steps if there is a failure to detect an HDMI signal. Ensuring that the HDMI cable is properly connected and meets ...
FAQs: Channel of Codec
SS50 MS7 Codec Series What is the decoding capacity of this codec in terms of channels? This codec can decode a maximum of four channels, which can be configured as 2x USB camera and 2x network streams, or 1x USB camera and 3x network streams, or ...
FAQs: System Info of Codec
How can we tell when the firmware was released? The firmware version number often contains information that indicates when it was released. For example, "V3.00.52.220921," the information can be interpreted as follows: "V3.00.52" comprises the main ...
FAQs: Maintain/Upgrade of Codec
Can we upgrade firmware directly through UI? Upgrading firmware directly through the user interface (UI) of an codec is generally NOT RECOMMENDED, due to the potential risks associated with the process. Firmware upgrades can significantly impact the ...
FAQs: Auto Reboot of Codec
Why is there no tab Auto Reboot in our codec? The absence of an "Auto Reboot" tab in an codec's settings may be due to a few reasons: Software Version: It's possible that the "Auto Reboot" feature is not available in the current software version ...
FAQs: Date & Time of Codec
Why should I configure Date & Time? Setting the date and time on the codec is crucial for leveraging its recording capabilities effectively. The accuracy of the date and time is essential for various functionalities, particularly when searching for ...
FAQs: System Settings of Codec
Device Name How can I change the device name for my HDMI codec? To change the device name of your HDMI codec, follow these steps: Access Settings: Go to the Settings menu on your HDMI codec. Navigate to System: Select System, then choose System ...