Absolutely, our encoder fully supports ONVIF Profile T and ONVIF Profile S, ensuring seamless compatibility and functionality with a wide array of devices and systems, offering comprehensive interoperability and efficient integration within diverse surveillance environments.
How to view live video in ODM?
Normally, you'll need to enter the username and password in the top left corner of the ONVIF Device Manager, as ONVIF authentication is enabled by default in the codec (under Settings -> Security -> ONVIF). Once the correct username and password are entered, the video stream should become visible in the ONVIF Device Manager.
RTSP Authentication How can we enable Authentication for RTSP on an HDMI Codec? To enable authentication for RTSP on your HDMI codec: Navigate to Settings -> Network -> RTSP. Check the checkbox labeled Authentication. Once authentication is enabled: ...
Video Go to Setting->Video/Audio->Video Item Description Channel CH1~CH8 (Determined by added decoding channels) Video Main stream/Sub stream Codec type H.264/H.265 Resolution Up to 1920*1080P(Main Stream) Bitrate Mode VBR/CBR Framerate Up to ...
ONVIF Go to Setting->Security->ONVIF NOTES: To enable ONVIF Authentication, simply check the checkbox. Once enabled, you must enter a username and password to log into the ONVIF Device Manager and view the live video. Otherwise, the ONVIF Device ...
Why is there no preview in the Image Settings Page on my HDMI Codec? If you can't see a preview in the image settings page on your HDMI codec, it's likely due to using an outdated firmware version. Here’s how to address the issue: 1. Firmware ...
What does 1920*1080P@30HZ mean? If it shows 1920*1080P@30HZ on GUI, probably it's failed to detect the HDMI signal. Take the following steps if there is a failure to detect an HDMI signal. Ensuring that the HDMI cable is properly connected and meets ...