FAQs: SQ Protocol for Encoder/Codec
What's SQ protocol?
The SQ protocol is a privately developed communication protocol by EXVIST, exclusively designed for use with EXVIST's encoder, decoder, IP camera, and other products. It is not open for use with devices from other manufacturers. If you encounter difficulties adding other devices using the SQ protocol, it is advisable to consider using alternative common protocols as a solution.
NOTES: Exclusively used for EXVIST's encoder, decoder, IP camera etc.
Related Articles
FAQs: Model Comparison of Encoder/Codec
GK72 & PRO ENCODER SERIES Part Number ON-DMI-16E ON-DMI-16EW ON-DMI-16EP ON-DMI-16D ON-DMI-16DW ON-DMI-16DP Part Name 1080P Basic HDMI Encoder w/SD Card Slot for Recording 1080P WiFi HDMI Encoder w/SD Card Slot for Recording 1080P PoE HDMI Encoder ...
FAQs: Download Firmware for Encoder/Codec
How can we access the page of download firmware? It's only visible for our registered users. The reason why you are unable to access the page to download the firmware is likely because EXVIST Cares requires users to register and log in before you can ...
FAQs: Failure of Detection or Upgrading
What's Failure of Detection? Detection failure refers to the inability of a system or device to accurately identify or detect another component or device. In the context of HDMI, IPCManager, or Device Manager, a detection failure would mean that the ...
FAQs: RTSP Push to Wowza Video
What's RTSP Push to Wowza Video? RTSP Push to Wowza Video refers to the ability to stream live video to Wowza Video software by using the Real Time Streaming Protocol (RTSP). This allows for the transmission of live video and ensures seamless ...
FAQs: Universal Priority
Is the priority of Power over Ethernet (PoE) higher than that of DC12V? In a scenario where an encoder or network camera can be powered either by a DC12V power source or by Power over Ethernet (PoE). In this setup, the encoder prioritizes power from ...